As you may be aware, several different things need to be considered when it comes to artificial turf installation. One of the biggest concerns is the weather. If you are going to use synthetic grass in the hot or humid summer months, there is a chance for your turf to become unsightly and susceptible to mold and mildew. Avoid the following issues during the hotter months:
INSTALLATION: The best way to avoid these problems is to hire a professional company to do the installation. In many cases, the grass seed may not be seated properly, or some of the needed materials may have been improperly procured. If you are the installer, it is your responsibility to ensure that all the materials are ready and on hand and then take your crew out to lay down the artificial turf.
SITES AND Laying: When you install artificial grass, it can take anywhere from four to six hours to lay one square yard. This can be spread out over a wide area such as a large field if need be. It is recommended that you have a dedicated crew of workers who can do this task. It is a good idea to have a couple of people on-site to lay the artificial turf installation, as you never know how long the grass seed will last.
Mowing and Cutting: When installing artificial grass installation over a natural lawn, cutting it at the right height is crucial. You want to keep the lawn as flat as possible, so water doesn’t pool and become stagnant. The height you cut is based on the size of the entire field, not just individual squares. When mowing is necessary, make sure that you have a professional mower with an automatic cutting feature.
Installing the Pieces: One thing to keep in mind when installing artificial turf installation is that each piece must be installed properly, or it will be obvious that something is missing. One thing that you must remember is that the joints between the individual strips must all be seamless. This means no sloping joints and no cuts. It is easy to cut into these seams, and the pieces will look very unfinished. A good way to avoid this is to have a professional sod cutter come and roll the lawn before you start. He will cut the sod just enough to ensure that there are no missing seams, and then you can install everything together.
The Power Broom and Rake: Now that the strips are installed, you must install the broom and rake, two separate pieces. The broom needs to be completely covered with grass, and the rake is attached to a handle, similar to a riding lawnmower. The easiest way to keep this machine in good working order is to have a professional service perform yearly maintenance. You can save yourself the trouble of remembering when each piece should be serviced by calling in the professionals.
The Role: The last piece of the artificial grass installation is the actual roll. This is the most difficult part of the installation because it is basically setting up the entire set up on the grass surface. First, you will want to prepare the turf by removing all the old sod and tilling it into the proper pattern. Then you will want to hook a rope around the perimeter of the installation area to pull back and set the new synthetic grass.
After that, you will need to rake to fill in the spaces between the holes and spread it out evenly. Finally, you will want to brush in the top layer of infill to create a smooth, even coating. When the grass is completely set, you will want to push it into the holes using the power broom and rake. This process can take some time, but it will be worth it when you see the grass’s effect. Artificial turf can last for several years if it is properly maintained. If you are new to this kind of installation, consider hiring professionals. Visit their website and get the job done right the first time.